Check Fuel Level, Add Fuel OPERATION When filling with fuel, do not add more fuel after the fuel supply has automatically stopped. If too much fuel is added, there is danger that the fuel may expand because of the rise in the ambient temperature and cause the fuel to overflow. Spilled fuel may cause a fire. Always wipe off any spilled fuel completely. Fuel is highly flammable and a dangerous substance. Never bring fire or flames near fuel. Remark If the engine has run out of fuel and has stopped, it is necessary to bleed all the air from the fuel line before starting the engine again. Be careful not to let the engine stop because of lack of fuel.
If the engine has run out of fuel, the air bleeding operation can be carried out more quickly when the fuel tank is full. For details about the bleeding air procedure, see “Replace Fuel Main Filter Cartridge (Standard Specification)” on page 3-72. 1. Turn the engine starting switch to the ON position (B) and check the fuel level with fuel level gauge (G). 2. After checking, turn the switch back to the OFF position (A). 3. After completing daily operations, refill fuel through fuel filler port (F) until the fuel tank is full. For details about opening and closing the cap, see “Locking Caps” on page 2-65. For precautions when handling fuel, see “Rules for Refueling the Machine” on page 1-45.
4. After adding fuel, tighten the cap securely. Fuel capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 liters (86 gal) WA430-6 2-87