Komatsu — Starting in Cold Weather

OPERATION Starting in Cold Weather Sit down in the operator’s seat before starting the engine. Do not attempt to start the engine by short-circuiting the engine-starting circuit. Such an act may cause serious bodily injury or fire. Check that there are no persons or obstacles in the surrounding area and then sound the horn and start the engine. Exhaust gas is toxic. When starting the engine in confined spaces, be particularly careful to ensure good ventilation. Remark Do not suddenly accelerate the engine before the warming-up operation is completed.

When starting the engine after the machine has been left for more than half a day in temperatures near -20°C (-4°F), it will take time for the engine to achieve complete combustion. Do the following procedure to start the engine. 1. Turn the key in starting switch (1) to the ON position (B). If the ambient temperature is low, the preheating pilot lamp (2) lights up and automatic preheating is carried out. Keep the key in starting switch (1) at the ON position until the preheating pilot lamp (2) goes out. The time that the preheating pilot lamp (2) stays lit varies dependent on the ambient temperature as shown in the table to the right.

2-100 WA430-6 Ambient Temperature Lighting Time -2°C to -28°C (28.4°F to -18.4°F) 5 seconds to 45 seconds -28°C or less (-18.4°F or less) 45 seconds