Komatsu — Automatic Warming-Up Operation

2. When preheating pilot lamp (2) goes out, turn the key in starting switch (1) to the START position (C). OPERATION Keep the key in starting switch (1) at the START position (C) to keep the starting motor running until the engine starts. The starting motor will continue to turn and the engine will start. 3. Starting engine in temperatures of approximately -20°C (-4°F). A. Keep the engine starting motor running for a maximum of 20 seconds, holding the key of engine starting switch (1) in the START position (C) until the engine starts up. B.

If the engine fails to start even after running the engine starting motor for about 20 seconds, stop the engine starting motor once (release the engine starting switch (1) key), and try the same process again after a pause for a minute or so. C. If the engine still fails to start after the second attempt, try the same process for the third time after a pause for a minute or so. 4. When the engine has started and the engine speed rises, release the key of engine starting switch (1). The key will automatically return to the ON position (B). Automatic Warming-Up Operation When the engine water temperature is below 20°C (68°F), the automatic warming-up operation (engine speed:

1,000 rpm) is automatically actuated after the engine starts. It is cancelled when the engine water temperature rises over 30°C (86°F) (engine speed: 850 rpm). X: Engine speed (rpm) Y: Water temperature (°C) WA430-6 2-101