OPERATION Operations and Checks After Starting Engine Emergency stop: If the operation is abnormal or any other trouble occurs, turn the key in the starting switch to the OFF position. If the work equipment is operated without warming up the machine sufficiently, the response of the work equipment to the movement of the control lever will be slow. The work equipment may not move as the operator desires. Do all warm-up procedures. In cold areas, make sure to warm up the machine properly. Checks After Starting Engine Check Parking Brake Check that the parking brake works properly.
If there is any abnormality in the operation of the parking brake or the brake does not provide the proper braking effect, contact your Komatsu distributor for adjustment. Check Brake Pedal Set the machine on level ground with no obstacles in the surrounding area. Drive the machine slowly forward and in reverse and check the braking effect of the brakes. If there is any abnormality in the operation of the brakes, ask your Komatsu distributor to carry out adjustments. Check Travel of Brake Pedal Depress the brake pedal fully and check the distance from the floor. Check that the pedal is not too close to the floor and that there is no abnormal feeling when operating the brake pedal.
Check for Ease of Starting Engine, Abnormal Noise If any abnormality is found, ask your Komatsu distributor to carry out adjustments. When starting the engine, check that the engine does not make an abnormal noise and that it starts up easily and smoothly. Check that there is no abnormal noise when the engine is idling or when the revolutions rise slightly. If there is an abnormal noise when the engine starts and that condition continues, the engine may be damaged. In that case, ask your Komatsu distributor to check the engine as soon as possible.
Check Engine at Low Speed and When Accelerating Check that there is no irregularity in the engine speed and that the engine does not suddenly stop when the machine is stopped during normal travel. Check that the engine accelerates smoothly when the accelerator pedal is depressed. Carry out the inspection in a safe place and check that there is no one in the surrounding area. If the condition at low speed or when accelerating is extremely poor and that condition continues, there is danger that the engine may be damaged, that the operation of the machine may become erratic, that the braking effect may deteriorate, or that an unexpected accident may happen.
Ask your Komatsu distributor to carry out repairs as soon as possible. Check Location of Abnormalities from Previous Days Check the places where problems occurred when using the machine on previous days. If any abnormality is found, contact your Komatsu distributor for inspection and repair. 2-102 WA430-6