Komatsu — Moving the Machine

2. Check that the bucket control lever (2) and lift arm control lever (3) are at the HOLD position, then set the work equipment lock lever (4) to the FREE position (F). OPERATION 3. Operate lift arm control lever (3) to set the work equipment to the travel posture (A) shown in the graphic. (A): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 – 50 cm (16 – 20 in) 4. Depress right brake pedal (5) and then turn parking brake switch (6) to the OFF position (B) to release the parking brake. Keep the right brake pedal depressed.

Remark If the parking brake is still actuated when parking brake switch (6) is at the OFF position (B), turn the parking brake switch ON and then turn it OFF again. 5. Set gearshift lever (7) to the desired speed range position. Position (a): 1st Position (b): 2nd Position (c): 3rd Position (d): 4th WA430-6 2-107