Komatsu — Moving the Machine

OPERATION Moving the Machine (Directional, Speed), Stopping the Machine Always remove the frame lock bar for travel operations. If it is not removed, the steering wheel cannot be used for steering. This may lead to serious damage or injury. Do not allow people to get near the machine. When moving the machine, check that the area around the machine is safe and then sound the horn before starting. Clear obstacles from the machine’s travel path. The engine hood creates a blind spot at the rear of the machine. Be very careful when traveling in reverse. When starting the machine on a slope, set the transmission cutoff switch to the OFF position and depress the left brake pedal.

Then depress the accelerator pedal and gradually release the brake pedal to start the machine. This makes it possible to prevent the machine from rolling back. Moving the Machine 1. Check that caution lamp (1) is not illuminated. 2-106 WA430-6