Komatsu — Check After Stopping Engine

Stopping Engine OPERATION Remark If the engine is abruptly stopped before it has cooled down, engine life may be greatly shortened. Do not abruptly stop the engine except for an emergency. If the engine has overheated, do not abruptly stop it but run it at medium speed to allow it to cool gradually and then stop it. 1. Run the engine at low idle for about five minutes to cool it down gradually. 2. Turn the key of starting switch (1) to the OFF position (A) to stop the engine. 3. Remove the key from starting switch (1). Check After Stopping Engine 1. Walk around the machine and check the work equipment, bodywork, and undercarriage. 2. Check for oil and water leakage. 3. Fill the fuel tank.

See “Check Fuel Level, Add Fuel” on page 2-87. 4. Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard. 5. Remove any mud stuck to the undercarriage. WA430-6 2-105