Komatsu — Changing Gear Speed

Changing Gear Speed OPERATION When traveling at high speed, do not shift gear suddenly. Use the brake to reduce the travel speed before shifting gear. Shifting gear Move the gearshift lever (1) to the desired position to shift gear. Position (a): 1st Position (b): 2nd Position (c): 3rd Position (d): 4th When carrying out digging and loading operations, 1st and 2nd gears are used. Use the gearshift lever stopper (2). This machine is equipped with a kickdown switch (3) that shifts the gear down to 1st if the kickdown switch (3) is pressed when the machine is traveling in 2nd gear. We recommend the use of the kickdown switch when carrying out digging or loading operations in 1st or 2nd gear.

For details, see “Kickdown Switch” on page 2-50. This machine is equipped with an auto-shift function that automatically shifts the gear. For details about this function, see “Transmission Shift Mode Selector Switch” on page 2-45 and “Automatic Shift” on page 2-111. When traveling at high speed with the accelerator pedal depressed, even if the transmission is shifted down from 4th 3rd or 4th 2nd in order to protect the engine from overrunning, the transmission does not shift down. In this case, the central warning lamp illuminates and the alarm buzzer sounds. At the same time, “OVERRUN PROTECT” is displayed on the character display.

If the alarm buzzer sounds, release the accelerator pedal immediately; depress the brake pedal to reduce the travel speed; then shift gear. WA430-6 2-109