Automatic Shift OPERATION If an attempt is made to switch the direction between forward and reverse when the auto-shift is ON, the gearshift range will switch F3 R2, F4 R2, or R3 F2, R4 F2 to make it possible to move the machine quickly. If an attempt is made to shift between forward and reverse when the machine is traveling at high speed, such as shown in ranges (A) or (B) in the chart, the central warning lamp will light up and the buzzer will sound. At the same time, “OVERRUN PROTECT” is displayed on the bottom line of the character display. If the alarm buzzer sounds, depress the brake immediately to reduce speed and operate the directional lever to switch between FORWARD and REVERSE.
In particular, if an attempt is made to switch between forward and reverse in range (B), the speed range will not shift to 2nd but will switch F3 R3, F4 R4, or R3 F3, R4 F4. As a result, the reduction in speed will be less than in range (A). WA430-6 2-111