3. Turn parking brake switch (4) to the ON position (A) to apply the parking brake. OPERATION Remark When the parking brake is applied, the transmission is automatically returned to neutral. Transmission Cutoff Function When the transmission cutoff switch is turned ON, the pilot lamp illuminates and the following transmission cutoff function is actuated. Position (a): OFF Position (b): ON When the brake pedal is depressed, the brakes are actuated and the transmission is shifted to neutral when the brake pedal is depressed to the set position.
For details about adjusting the set position for the amount that the brake pedal is depressed, see “Adjusting Transmission Cutoff Position” on page 2-114. To match the following type of work, adjust the set position to cut off the transmission at a smaller or larger angle. When carrying out scooping-up work, lower the brake pedal depression position for the cutoff (transmission shifted to neutral). In this setting, the transmission driving force is cut at a point where there is ample braking force. This prevents the machine from slipping down. When approaching dump trucks during loading operations, raise the brake pedal depression position for the cutoff (transmission shifted to neutral).
In this setting, the fine control of the braking immediately before dumping the load can be carried out with the brake only. This makes it easy to control and allows the machine to be brought to a soft stop. WA430-6 2-113