Komatsu — Transmission Cutoff Function

OPERATION Adjusting Transmission Cutoff Position Apply the parking brake before adjusting the transmission cutoff position. Adjust the amount that the brake pedal is depressed. 1. Start the engine with starting switch (1) and then set parking brake switch (2) to the ON position. 2. Set transmission cutoff switch (3) to the ON position. 3. Depress brake pedal (4) and adjust the set position to return the transmission to neutral. 4. Press transmission cutoff set switch (5) and then release it. When the switch is released, the buzzer sounds with a repeated short sound and the cutoff position is set.

Canceling Cutoff Position After the buzzer sounds in Step 4 of the adjustment procedure, the transmission cutoff switch flashes for two seconds. While it is flashing, press transmission cutoff set switch (5) again and release it. The buzzer sounds with a long sound and the adjusted cutoff position is canceled. Stopping When Transmission Cutoff Is On When the transmission cutoff switch is at the ON position and the left brake pedal is depressed, the transmission is returned to neutral when the brake pedal is depressed to the set position. Remark When the transmission cutoff switch is OFF, the transmission is not shifted to neutral. 2-114 WA430-6