Komatsu — Turning

Turning OPERATION Turning the steering wheel quickly at high speed or on steep slopes is dangerous. Turn the steering wheel smoothly in such situations. Never jerk the steering wheel. If the engine stops when the machine is traveling, the emergency steering is actuated. This system is only for steering in emergencies; never stop the engine. It is particularly dangerous if the engine stops when the machine is traveling on slopes. Never let the engine stop when traveling on slopes. If the engine stops, stop the machine immediately at a safe place. When traveling, use steering wheel (1) to turn the machine.

With this machine, the front frame is joined to the rear frame at the center of the machine by the center pin. The front and rear frames bend at this point, and the rear wheels follow in the same track as the front wheels when turning. Turn the steering wheel smoothly; do not attempt to make tight turns. Remark When the steering wheel is turned completely and reaches the end of its stroke, do not try to turn it further. Check that there is a play of 50 to 100 mm (2 to 4 in) in the steering wheel. Check that the steering works properly. If any abnormality is found, contact your Komatsu distributor for inspection. WA430-6 2-115