OPERATION Operation of Work Equipment When standing up from the operator's seat, always set the work equipment lock lever securely to the LOCK position. If the work equipment lock lever is not locked and work equipment control lever (A) is touched by mistake, this may lead to serious personal injury. If the work equipment lock lever is not set securely to LOCK position (L), the work equipment may move and cause serious personal injury. Check that the work equipment lock lever is at the position shown in the graphic. When pulling the work equipment lock lever up or pushing Work Equipment Lock Lever Work equipment lock lever (4) is a lock device for work equipment control levers (A).
Pull the work equipment lock lever towards the center of the machine to set it to the LOCK position (L). Lift Arm Control Lever Lift arm control lever (1) is used to operate the lift arm. Set the work equipment lock lever to the FREE position (F) before operating the control lever. Position (a): RAISE When the lift arm control lever is pulled further from the RAISE position, the lever stops at that position until the lift arm reaches the preset position of the kickout, and the lever is returned to the HOLD position. Position (b): HOLD Position (c): LOWER The lift arm is held in the same position. 2-118 WA430-6