Komatsu — Emergency Steering Self-Check Function

Emergency Steering Self-Check Function OPERATION If the machine is steered during the steering self-check, it may move. Do not steer the machine during the steering self-check. When the starting switch is turned ON, the emergency steering is automatically actuated for approximately three seconds to check that the emergency steering is functioning properly. When this happens, steering oil pressure caution lamp (red) (1) and emergency steering pilot lamp (green) (2) light up. The emergency steering function check is not carried out in the following cases: If the starting switch is turned ON, turned OFF again without starting the engine, and is then turned ON again.

If the starting switch is turned ON again immediately after stopping the engine when the steering oil pressure has not gone down completely. If the engine is being preheated. When preheating is being carried out, the emergency steering self- check function is not actuated. To check the emergency steering function, press the emergency steering switch (1) after completing the warming-up operation. WA430-6 2-117