Reversing Away From Dump Truck OPERATION Do not shift down with the accelerator pedal depressed (with the engine speed raised). If the transmission is shifted down when the engine speed is high, there will be an excessive load on the engine, torque converter, transmission, axles, final drive, and the whole power train. In addition, the tires will slip and cause wear of the tires. Do not operate the steering immediately after switching between forward and reverse (when the machine is stationary). If the steering is operated when the machine is stationary, it will cause wear or cuts to the tires. 1. Switch to R2 and drive in reverse. 2.
While driving in reverse, lower the lift arm and operate the steering to face the position for scooping up. 3. Depress the brake pedal and stop the machine. 4. Let back the accelerator pedal to reduce the engine speed and then switch from R2 to F2. 5. Lower the bucket to the ground and drive forward to clear the surface (remove all boulders). Do not operate the steering when carrying out the leveling operation. Travel forward with the machine facing directly to the front. WA430-6 2-131