OPERATION Adjusting Work Equipment Stop the machine on flat ground and put blocks in front of and behind the tires. Set the parking brake switch to the ON position (A) to apply the parking brake. Set the frame lock bar to LOCK position (L) to lock the front and rear frames. Always attach a warning sign to the work equipment control levers. Do not go under the work equipment when the arm is raised. The boom kickout makes it possible to set the bucket so that it automatically stops at the desired lifting height (lift arm higher than horizontal). The bucket positioner makes it possible to set the bucket so that it automatically stops at the desired digging angle.
The setting can be adjusted to match the working conditions. Adjusting Boom Kickout 1. Raise the bucket to the desired position and return the lift arm control lever to the HOLD position (b). 2. Set the work equipment lock lever (1) to the LOCK position (L) and stop the engine. 2-140 WA430-6