OPERATION 2. Place directional lever (3) in the neutral position (N). 3. Turn parking brake switch (4) to the ON position (A) to apply the parking brake. Remark When the parking brake is applied, the transmission is automatically returned to neutral. 4. Operate lift arm control lever (5) to lower the bucket to the ground. Always lower the work equipment completely to the ground. 5. Check that the lift arm control lever (5) and bucket control lever (6) are at the HOLD position 6. Set the work equipment lock lever (7) to the LOCK position (L). 7. Stop the engine.
Always close the operator’s cab door and use the key to lock all the equipment in order to prevent any unauthorized person from moving the machine. 8. Remove the key; take it with you; and leave it in the specified place. 2-150 WA430-6