Komatsu — Securing the Machine

Securing the Machine OPERATION Secure the machine to the trailer in the following manner. 1. Lower the work equipment slowly. 2. Set the work equipment control lever at the HOLD position. 3. Set the work equipment lock lever to the LOCK position (L). 4. Set the parking brake switch to the ON position (A) to apply the parking brake securely. 5. Retract the antenna fully. 6. Turn the starting switch to the OFF position to stop the engine. 7. Remove the key from the starting switch. 8. Set the frame lock bar to the LOCK position (L) to lock the front frame and rear frame. 9. To help keep the machine in position, place blocks in front and behind the front and rear wheels for extra support. 10.

Locate the tie down and transportation brackets on the machine; see “Fastening Positions” on page 2-160. 11. Secure the machine with chains or wire rope to prevent the machine from moving during transportation. In particular, attach the machine securely to prevent it from slipping sideways. 12. Adjust the mirrors so that they will be within the width of the trailer. 13. Protect the exhaust stack from moisture, if necessary. WA430-6 2-159