4. Move the parking brake switch to the ON (A) position (actuated), then move it to the OFF (B) position (released). OPERATION The parking brake is released. 5. To restore the function of the parking brake, turn grip (2) of the release valve clockwise to close the release valve, then turn locknut (1) clockwise to lock it. Tightening torque: Grip (2): . . . . . . . . . . . . . . . . . . . . . . . . . 20 ±5 N•m (177 ±44 lbf in) Locknut (1): . . . . . . . . . . . . . . . . . . . . . . 20 ±5 N•m (177 ±44 lbf in) 6. Move the parking brake switch to the ON (A) position. The parking brake is applied. To release the parking brake again, repeat the procedure in Steps 1 to 4.
Remark If the brake accumulator pressure is low, the parking brake warning lamp may not go out and the alarm buzzer may make a continuous high-pitched sound. If this happens, release the brake. For details, see “Releasing Parking Brake Mechanically” on page 2-180. WA430-6 2-179