OPERATION Releasing Parking Brake When releasing the parking brake, stop the machine on level ground and check that the surrounding area is safe. If the machine is on a slope and it is necessary to release the brake in an emergency, block the tires before starting the operation. If the parking brake is released, the brake cannot be used. Pay particular attention to safety when moving the machine. If the engine does not run for some reason, use the following methods to release the parking brake and tow the machine. Releasing Parking Brake by Using Emergency Parking Brake Cancel Valve If the pressure in the brake accumulator is high, do the following steps. 1.
Turn the starting switch to the OFF position (A). 2. Turn locknut (1) of the release valve counterclockwise, then turn grip (2) counterclockwise to open the release valve. Remark The relief valve is located on the left front portion inside the rear frame and secured to the accumulator mounting bracket. 3. Turn the starting switch to the ON position (B). 2-178 WA430-6