Komatsu — Oil Sampling

MAINTENANCE Performing KOWA (Komatsu Oil Wear Analysis) KOWA (Komatsu Oil Wear Analysis) is a maintenance service that makes it possible to prevent machine failures and downtime. With KOWA, the oil is periodically sampled and analyzed. This enables early detection of wear of the machine drive parts and other abnormalities. We strongly recommend that you use the KOWA service. The results of the analysis are reported, together with recommendations which will reduce repair costs and machine downtime. The oil analysis is done at low cost (only the actual expenses are charged).

KOWA Analysis Items The analysis of the following items enables you to obtain a very precise diagnosis of the health of the machine. Measurement of density of metal wear particles This uses an ICP (Inductively Coupled Plasma) analyzer to measure the density of iron, copper, and other metal wear particles in the oil. Measurement of particle quantity This uses a PQI (Particle Quantifier Index) instrument to measure the quantity of large iron particles (larger than 5 microns) in the oil, which enables the early detection of failures. Others Measurements are made of items such as the ratio of water in the oil, density of the antifreeze coolant, ratio of fuel in the oil, and dynamic viscosity.

Oil Sampling Sampling interval: 250 hours: Engine 500 hours: Other components Precautions when sampling: Make sure that the oil is well mixed before sampling. Perform sampling at regular fixed intervals. Do not perform sampling on rainy or windy days when water or dust can get into the oil. For further details about KOWA, contact your Komatsu distributor. 3-8 WA430-6