MAINTENANCE Microbial Growth Biodiesel fuel is an excellent medium for microbial growth. Microbes cause fuel system corrosion and premature filter plugging. The effectiveness of all commercially available conventional anti-microbial additives, when used in biodiesel, is not known. Consult your fuel and additive supplier for assistance. Komatsu Biodiesel Blend Specification for B5 to B20 Final Blend Fuel Requirements (at point of delivery) * Blend fraction refers to the variation in volume percent of B100 in diesel fuel claimed.
The maximum cloud point temperature shall be equal to or lower than the tenth percentile minimum ambient temperature in the geographical area and seasonal time frame as defined by ASTM D975. Use glass fiber filter.
3-18 WA430-6 Item Performance Characteristics Requirements Test Procedure D1 Blends D2 Blends 1 Flash Point, minimum 38°C (100°F) 52°C (125°F) ASTM D93 2 Water and sediment volume, maximum 0.05% 0.05% ASTM D2709 or D1796 3 Physical Distillation, T90°C (T194°F), maximum 343 343 ASTM D86 4 Kinematics Viscosity, cSt at 40°C (104°F) 1.3 – 4.1 1.9 – 4.1 ASTM D445 5 Ash, mass%, maximum 0.01 0.01 ASTM D482 6 Sulfur, st% maximum Per regulation Per regulation ASTM D482 7 Copper strip corrosion rating, maximum Number 3 Number 3 ASTM D130 8 Cetane Number, minimum 43 43 ASTM D613 9 Cloud Point 1 Per foot note Per foot note ASTM D2500 10 Rams bottom carbon residue on 10% distillation residue, wt%, maximum 0.15 0.35 ASTM D524 11 Lubricity, HFRR at 60°C (140°F), micron, maximum 460 460 ASTM D6079 12 Acid number, mgKOH/g, maximum 0.3 0.3 ASTM D664 13 Phosphorus, wt%, maximum 0.001 0.001 ASTM D4951 14 Total Glycerin – – N/A 15 Alkali metals (Na+K), ppm, maximum Nd Nd EN14108 16 Alkali metals (Mg+Ca), ppm, maximum Nd Nd EN14108 17 *Blend fraction, volume%² ±2% ±2% EN14078 18 Thermo-oxidative stability, insolubles, mg/100 mL, maximum 10 10 Modified ASTM D2274³ 19 Oxidation stability, Induction time, hours, minimum 6 6 EN14112 (Rancimat)