SERVICE PROCEDURE MAINTENANCE Initial 10 Hours Service Perform the following maintenance every 10 hours for the first 50 hours of operation for a new machine. Lubricating For details, see “Lubricating” on page 3-66. Initial 250 Hours Service Perform the following maintenance only after the first 250 hours. Change transmission oil filter cartridge. For details, see “Change Oil in Transmission Case, Replace Oil Filter Cartridge, Clean Strainer” on page 3-76. Replace hydraulic tank filter element. For details, see “Change Oil in Hydraulic Tank, Replace Hydraulic Filter Element” on page 3-79. Initial 1000 Hours Service Carry out the following maintenance only after the first 1000 hours.
Check engine valve clearance, adjust For details, see “Check Engine Valve Clearance, Adjust” on page 3-88. WA430-6 3-27