Komatsu — Replace Bucket Teeth (if equipped)

MAINTENANCE 6. Clean the installation surface of the tooth and adapter (3). 7. Fit new tooth (1) in adapter (3); use your hand to push in pin (2) partially; then knock it in with a hammer. 8. After operating the machine for a few hours, check that the pin does not come out. 9. If mounting bolts (4) or (5) of adapter (3) are loose, tighten them. Tightening torque of mounting bolt: (4): . . . . . . . . . . . . . . . . . . . . . . . . . 637 ±853 N•m (470 ±629 lbf ft) (5): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 618 N•m (456 lbf ft) 3-48 WA430-6