Komatsu — Check Function of Accumulator

MAINTENANCE Check Function of Accumulator The accumulator is charged with high-pressure nitrogen gas. When handling the accumulator, a careless procedure may cause an explosion which could lead to serious personal injury or death. Remark For details about handling the accumulator, see “Accumulator and Gas Spring” on page 1-50. Accumulator for Travel Damper (ECSS) When the ECSS switch is ON, the hydraulic spring effect of the accumulator absorbs the up-and-down motion of the machine during travel, and reduces swaying. Drive the machine and compare the up-and-down movement of the machine during travel when the ECSS switch is ON and when it is OFF.

If there is no change in the up-and-down movement of the machine, the gas pressure in the accumulator has probably dropped. Contact your Komatsu distributor to have the accumulator inspected. Remark Carry out the inspection with the speed range set to 2 – 4 and the machine traveling at a speed of at least 5 km/h (3 mph). If the speed range is 1st or if the machine is traveling at a speed of less than 5 km/h (3 mph), the ECSS will not be actuated even if the ECSS switch is turned ON. Accumulator for Brake Damper When the brake pedal is depressed, the hydraulic spring effect of the accumulator actuates the brake smoothly.

If any change is felt in the smoothness of the brake operation during daily operations, the gas pressure in the accumulator has probably dropped. Please contact your Komatsu distributor to have the accumulator inspected. Remark Even if there is a change in the smoothness, there is no drop in the braking force or brake performance. 3-52 WA430-6