Komatsu — Steering with Joystick Lever or Steering Wheel

Steering with Joystick Lever or Steering Wheel OPTIONS, ATTACHMENTS Set the joystick lever to the Neutral position when starting the engine. If the directional lever and joystick directional selector switch are not at the neutral position, the neutral interlock circuit makes it impossible to switch the transmission directional control (when the joystick ON/OFF switch is ON, it is switched from the directional lever to the joystick directional selector switch; when the joystick ON/OFF switch is OFF, it is switched from the joystick directional selector switch to the directional lever). Never use the joystick when traveling on public roads.

When traveling on public roads, turn the joystick ON/OFF switch to the OFF position, then tilt the joystick console lever portion to the rear. If the engine is running and the joystick lever is touched by accident, there is danger that it may cause the machine to articulate unexpectedly. To avoid this when the machine is not being operated, always move the joystick ON/OFF switch to the OFF position and tilt the joystick console lever portion to the rear. Use the joystick only when carrying out continuous loading operations. Never use the joystick when carrying out load-and-carry operations. Select joystick operation or steering wheel operation according to the type of work.

Before using the joystick steering, read the precautions in “Precautions for Steering with Joystick” on page 5-8. Steering Using Joystick This is suited for continuous loading operations on job sites with ample space, where the loading operation can be carried out with a comparatively relaxed cycle time. Because operations can be carried out with small movements and light operating effort, this is also suitable for reducing operator fatigue when operating continuously. When the joystick is actuated, the transmission will not enter the 4th speed range. Steering Using Steering Wheel This provides excellent fine control and ability to travel in a straight line.

It is suitable for travel between job sites and for load-and-carry operations. It is also suitable for short-cycle loading operations because the upper part of the operator’s body is supported by the steering wheel when frequently switching between FORWARD and REVERSE. Always steer with the steering wheel when driving the machine on public roads. WA430-6 5-7