OPTIONS, ATTACHMENTS 4. Operate the joystick in direction (b) to turn the machine to the right; operate it in direction (a) to turn the machine to the left. The greater the angle of operation, the faster the articulating speed becomes. 5. It is possible to switch the articulating speed with the HI/LOW selector switch. Select the speed to match the operation. 6. When the machine has articulated to the desired angle, return the joystick to the N position. The joystick will return automatically to the N position. 7.
To return the direction of travel of the machine so that it travels in a straight line, operate the joystick in the opposite direction from the N position (for example, when the machine is articulated to the right, operate the joystick to the left). 8. Use the directional selector switch at the top of the joystick lever to set the transmission to the direction of travel. N position: NEUTRAL F position: FORWARD R position: REVERSE If the position of the directional lever and the directional selector switch are different, the joystick pilot lamp flashes; the warning lamp lights up; and the alarm buzzer sounds.
In this condition, the machine moves to the front or rear according to the position of the directional lever. Place the directional lever at the N position. 9. When the shift mode is in manual, use shift UP switch (1) and shift DOWN switch (2) on the joystick lever to shift the travel speed range. 5-10 WA430-6