Operating the Joystick Steering System OPTIONS, ATTACHMENTS It is dangerous to turn the machine suddenly at high speed, or to turn on steep hills. Do not operate the steering in such conditions. When turning, the articulation stops at the position to which the steering wheel is turned, but if the joystick is held in the tilted position, the body will articulate fully. The feeling when operating the steering with the joystick is different from when operating with the steering wheel. Be extremely careful until you have become used to operating the joystick.
If the joystick ON/OFF switch is at the ON position and the directional lever is operated to F or R, the machine will travel in forward or reverse according to the operation of the directional lever, regardless of the position of the directional selector switch on the head of the joystick lever. Priority is given to the operation of the directional lever; be careful when operating the directional lever. When this is done, the central warning lamp lights up and the alarm buzzer sounds. Set the directional lever and directional selector switch on the head of the joystick to the N position. Check the adjustment and operation before starting the engine.
See “Check Before Starting Engine” on page 2-80. 1. When starting the engine, check that the joystick lever is at the N position, that the transmission directional lever is at the N position, and that the surrounding area is safe. 2. Under the following conditions, a warning may be given when the engine is started. If the directional selector switch on the joystick is at F or R, the joystick pilot lamp flashes; the central warning lamp lights up; and the alarm buzzer sounds. In this condition, the engine will not start. Set the directional selector switch to N.
If the joystick is not at the N position, the joystick pilot lamp flashes; the central warning lamp lights up; and the alarm buzzer sounds. In this condition, the engine will not start. Set the joystick to the N position. 3. When using the joystick, set the joystick ON/OFF switch to position (a) to activate the joystick steering system. WA430-6 5-9