Adjustments OPTIONS, ATTACHMENTS Stop the machine on level ground in a safe place when carrying out the adjustment. Carry out the adjustment before starting operations or when changing operator shifts. Put your back against the backrest of the operator's seat and adjust the seat so that it is possible to depress the brake fully, then adjust the console. Adjusting Joystick Console 1. Grip console fore-and-aft adjustment lever (1) and adjust the position of the joystick console to the front or rear. If you grip the console fore-and-aft adjustment lever (1), lever portion (2) of the joystick console automatically tilts to the rear. Maximum slide to rear when getting on or off: . . . .
220 mm (8.7 in) Fore-and-aft adjustment when operating joystick: . 160 mm (6.3 in) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (16 mm (0.6 in) x 10 stages) 2. When using the joystick, adjust the fore-and-aft position, then push console tilt lever (3) to the front and tilt lever portion (2) fully from the rear to the front. 3. After doing this, set the joystick ON/OFF switch to the ON position. WA430-6 5-13