TORQUE CONVERTER LOCKUP OPTIONS, ATTACHMENTS When traveling down slopes with a grade of more than 6°, never depress the accelerator pedal fully, regardless of whether the torque converter lockup switch is ON or OFF. It is extremely dangerous to drive too fast. The travel speed mentioned in this section is applicable when the 23.5-25 tire is used. The travel speed is subject to working conditions and the road condition. To prevent overrunning when traveling at high speed in the following cases, do not downshift gears. When traveling in F3 at a speed of more than 18.0 km/h (11.2 mph), do not shift down to F2.
When traveling in F4 at a speed of more than 28.0 km/h (17.4 mph), do not shift down to F3. When the actual speed range is 3rd or 4th in either FORWARD or REVERSE, the torque converter lockup function is actuated according to the travel speed and sets to direct drive. To prevent overrun, the lockup is automatically canceled to prevent the travel speed from going above 40 km/h (24.9 mph). Components 1. Torque converter lockup switch 2. Torque converter lockup pilot lamp 3. Shift indicator (displays actual speed range) 4. Character display (Action code display) WA430-6 5-17