OPTIONS, ATTACHMENTS Torque Converter Lockup Switch The torque converter lockup switch (1) is the control switch for the torque converter lockup function. Position (a): ON The pilot lamp inside the switch lights up and the lockup is actuated dependent on travel speed. While the lockup is engaged, the lockup pilot lamp on the machine monitor lights up. Position (b): OFF The lockup does not function. Torque Converter Lockup Pilot Lamp The torque converter lockup pilot lamp (2) lights up when the torque converter lockup is engaged and the transmission actually enters direct drive. Shift Indicator The shift indicator (11) indicates the transmission gear range (actual travel speed range).
Character Display The character display (4) indicates if there is a failure on the machine, if it is necessary to change the method of operation, or if inspection or maintenance must be carried out. Action codes and short messages appear on the display. See “Action Code Display” on page 2-10 for additional information. The display to the right is an example. 5-18 WA430-6