Method of Operation OPTIONS, ATTACHMENTS 1. Press the top (a) of the torque converter lockup switch to turn it ON. The pilot lamp inside the switch lights up. When the actual speed range is 3rd or 4th in either FORWARD or REVERSE, the torque converter lockup function is actuated according to the travel speed and sets to direct drive. When the gearshift lever is at 4th in auto-shift mode, the lockup is not actuated if the actual speed range is 3rd. The lockup is actuated only when the actual speed range is 4th. When the lockup is actuated, the lockup pilot lamp on the machine monitor lights up. 2.
To cancel the lockup function, press the bottom (b) of the torque converter lockup switch to turn it OFF. The lockup function is canceled. For a full description of the torque converter function, see Transmission Controller System in the Shop Manual . Remark The travel speed for actuation and cancellation of the lockup function is shown in the table. The travel speed mentioned in this table is applicable when the 23.5-25 tire is used.
WA430-6 5-19 Lockup Speed Range FORWARD Travel Speed km/h (mph) REVERSE Travel Speed km/h (mph) Actuated Canceled Actuated Canceled 3rd 11 to 13 (6.8 to 8.1) 10 to 12 (6.2 to 7.5) 12 to 14 (7.5 to 8.7) 11 to 13 (6.8 to 8.1) 4th 19 to 22 (11.8 to 13.7) 18 to 21 (11.2 to 13.0) 20 to 23 (12.4 to 14.3) 19 to 22 (11.8 to 13.7)