Method of Operation OPTIONS, ATTACHMENTS Setting Preset Buttons It is possible to preset six MW (AM) stations and 12 FM stations (FM1: six stations, FM2: six stations). Remark If you are playing the cassette, press the tape eject button to stop the tape. Using Auto-Preset 1. Use band selector button (1) to select MW (AM), FM1, or FM2. 2. Press auto-store/preset scan button (2) for less than 0.5 second. 3. The preset scan tuning function automatically searches for the desired station within the same band and can memorize as many as six stations in the preset memory. Using Manual Preset 1. Use band selector button to select MW (AM), FM1, or FM2. 2.
Press manual tuning buttons (2) or SEEK tuning buttons (3) to select the station to be preset. 3. Keep one of the preset buttons (4) pressed for two seconds while the frequency display is shown on the display. (The preset channel and frequency are displayed and the presetting is completed.) 4. Repeat Steps 2 and 3 to preset other stations to the subsequent numbers. 5. If you want to preset a station in the other bands, follow Steps 1 to 4. Remark Use Steps 2 and 3 when changing the setting of a preset switch to another station. When the power is disconnected, such as when the battery is replaced, all the settings are deleted. You must preset the stations again. WA430-6 5-27