Komatsu — Listening to Cassette Tape

OPTIONS, ATTACHMENTS Listening to Radio 1. Turn the starting switch ON and then turn power switch (1) ON. 2. Set band selector button (2) to MW (AM), FM1, or FM2. 3. Select the station with the preset buttons (3). If you want to tune to a station that is not preset, use either seek tuning buttons (5) or manual tuning buttons (6). Remark In case you do not remember the number assigned to a certain preset station, press the auto-store/preset scan button (4) for less than 0.5 second. The six preset stations will broadcast one after another for five seconds each. When the desired station broadcasts, press the button again and scan tuning stops at that station. 4.

Adjust the volume, balance, and tone as desired. 5. When turning the radio OFF, turn power switch (1) to the left until you hear a click. Remark To switch to the radio when listening to a cassette, press the cassette eject button to stop the tape. If you insert a cassette when listening to the radio, the tape will start to play. Listening to Cassette Tape 1. Turn the starting switch ON and then turn power switch (1) ON. 2. Set the cassette with the exposed portion of the tape on the right side and push it through the cassette door. The tape starts to play automatically.

If the arrow indicating the direction of play is pointing to the right, the top side is being played; if the arrow is pointing to the left, the bottom side is being played. When the tape reaches the end, it reverses automatically and the other side starts to play. 3. When you have finished with the tape, press the cassette eject button to eject the tape and automatically switch to the radio. 5-28 WA430-6