Komatsu — LIFTING MACHINE

TRANSPORTATION OPERATION LIFTING MACHINE 3 q Never raise the machine with any worker on it. q Always make sure that the wire rope used for lifting the machine is of ample strength for the weight of the machine. q Never lift the machine with the upper structure swung to the side. Swing the work equipment so that it is at the sprocket end and set the undercarriage and upper structure parallel before lifting. q When lifting, keep the machine horizontal. q Never go under the machine when it is raised. q Never try to lift the machine in any posture other than the posture given in the procedure below. There is a hazard that the machine may lose its balance. lift the machine.

This will damage the cab. It is prohibited to use the transportation holes in the track frame to lift the machine. This will damage the track frame. NOTICE q For the details on the machine weight, see the section of “SPECIFICATIONS (5-2)“. q The lifting procedure applies to machines with standard specifications. The method of lifting differs according to the attachments and options actually installed. In such cases, please contact your Komatsu distributor for information. 3-98 WARNING CAUTION