Komatsu — BEFORE STORAGE

LONG TERM STORAGE OPERATION LONG TERM STORAGE 3 BEFORE STORAGE 3 NOTICE To protect the hydraulic cylinder piston rod while in stor­ age, keep the work equipment in the posture shown at right. (This prevents rust from developing on the piston rod) When keeping in long-term storage (more than one month), store as follows. q Clean and wash all parts, then store the machine indoors. If the machine has to be stored outdoors, select level ground and cover the machine with a sheet. q Fill the fuel tank to prevent moisture from accumulating. q Completely fill the fuel tank, lubricate and change the oil before storage. q Apply a thin coat of grease to the metal surface of the hydraulic piston rods.

q Disconnect the negative terminals of the battery and cover it, or remove it from the machine and store it sepa­ rately. q Lock each control lever and pedal with the safety lock lever and pedal lock. q Set the stop valve to the LOCK position on machines ready for attachments. Install the blind plugs to the elbows. q Set the selector valve on the machines which can install attachments to the “Crusher or general attachment“ position. 3-104