MAINTENANCE MAINTENANCE PROCEDURE Mixing rate of water and antifreeze Min. atmospheric tempera ture Amount of antifreeze Amount of water Antifreeze is flammable, so keep it away from flame. Antifreeze is toxic. When removing the drain plug, be careful not to get water containing antifreeze on you. If it gets in your eyes, flush your eyes with large amount of fresh water and see a doctor at once. Use city water for the cooling water. If river water, well water or other such water supply must be used, contact your Komatsu distributor. We recommend use of an antifreeze density gauge to control the mixing proportions.
Prepare a container of a capacity of at least 3.3 liters (0.87 US gal) to catch the coolant. q Prepare a water inlet hose. 1. Open the engine rear cover and cooling cover. For details, see Section “COOLING COVER (3-30)“. 2. Check that the cooling water temperature has gone down enough to make it possible to touch the radiator cap sur face by hand, then turn radiator cap (1) slowly until it con tacts the stopper to release the pressure. 3. Following this, push radiator cap (1), turn it until it contacts the stopper, then remove it.
4-23 °C Above -10 -15 -20 -25 -30 °F Above 14 5 -4 -13 -22 liters 1.0 1.1 1.4 1.5 1.6 US gal 0.26 0.29 0.37 0.40 0.42 liters 2.3 2.2 1.9 1.8 1.7 US gal 0.61 0.58 0.50 0.48 0.45 WARNING