MAINTENANCE MAINTENANCE PROCEDURE 4. Fit a steel pipe in the rubber shoe, then rotate the sprocket again and fit the rubber shoe securely on the idler. 5. Stop the rotation, and check that the rubber shoe is securely fitted to the sprocket and idler. 6. Adjust the tension of the rubber shoe. For details, see “CHECK AND ADJUST RUBBER SHOE TENSION (4-33)“. 7. Check that the track tension is correct and that the rubber shoe is correctly meshed on the sprocket and idler, then lower the machine to the ground. REPLACE ROAD LINERS 4 (Machine equipped with road liner) q When replacing all the road liner for the machine, please contact your Komatsu distributor to have the replace ment carried out.
q When replacing only part of the road liner, use the special road liner removal tool. Please order the tool from your Komatsu distributor. 4-37