Komatsu — Every 250 Hours Maintenance

AIR CONDITIONER ATTACHMENTS AND OPTIONS Every 250 Hours Maintenance 6 CHECK AND ADJUST AIR CONDITIONER COMPRESSOR BELT TENSION Checking The belt should deflect 5 to 6 mm (0.197 to 0.236 in) when pressed with a finger force of approx. 58.8 N (6 kgf, 13 lb) at a point midway between the idle pulley and compressor pulley. Adjustment Adjust the belt tension with adjustment nut (2) of idle pulley (1). 1. Open the engine rear cover and loosen locknut (3). 2. Adjust with adjustment nut (2) so that the deflection of the belt is 10 to 15 mm (0.4 to 0.6 in) (approx. 58.8 N (approx. 6 kgf)). 3. Tighten nut (3) to hold idle pulley in position. 4.

Check for damage to the pulleys, and wear of the V-groove and V-belt. Be particularly careful to check that the V-belt is not in contact with the bottom of the V-groove. 5. Replace belt if it has stretched, leaving no allowance for adjustment, or if there is a cut or crack on V-belt. 6. When the new V-belt is set, readjust it after operation for an hour. 6-8