Komatsu — MUD COVER

OPERATION DETAILED CONTROLS AND GAUGES MUD COVER 3 q Never climb on top of the cover. There is danger that you may slip and fall. q When carrying out inspection and maintenance inside the cover, always open the cover fully and check that it is secured in position by the support lever. NOTICE Always keep the hood locked except when opening it. Check the direction of the key slot in the opening knob to check that it is locked. 1. Release lock (1) of the cover. (For details of the method of opening and closing the cover with the lock, see Section “In Case of Engine Rear Cover and Dirt Cover (3-28)“. 2. Push opening knob (1) of the dirt cover to release the lock, then open cover (2). 3.

When dirt cover (2) is opened fully, it is secured in position by support lever (3). After opening dirt cover (2), check that cover (2) is secured in position by support lever (3). 4. When closing dirt cover (2), pull up support lever (3) slightly, hold cover (2), lower it slowly, then push cover (2) in to lock it. 5. Lock the cover. 3-31 WARNING