Komatsu — METHOD OF OPENING (TILTING) FLOOR

DETAILED CONTROLS AND GAUGES OPERATION METHOD OF OPENING (TILTING) FLOOR 3 opening or closing the floor. If the operation is carried out mistakenly, it may lead to serious personal injury. Do not open or close the floor on slopes. Do not open or close the floor when there is a strong wind. Do not enter the floor area or the inside of the cab when the floor is open. Do not start the engine when the floor is open. If there is any breakage or abnormality in the lock when the floor is opened, stop the operation and ask your Komatsu distributor to carry out repairs. Do not remove the canopy. There is danger that the floor may suddenly come up. Do not remove the floor mounting bolts (1).

There is dan­ ger that the floor may suddenly come up. Before starting the opening (tilting) operation of the floor, read the precautions related to safety and maintenance in Section “CAUTIONS FOR OPENING (TILTING) FLOOR (2-35)“. When opening (tilt open) 1. Lower the blade. 2. Extend the bucket and arm cylinders fully, then lower the boom slowly. 3. Set the safety lock lever to the LOCK position, then stop the engine. REMARK For machines equipped with a cab, there is only a safety lock lever on the left. 3-32 WARNING