MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATIONS AND CONTROLS 3 BEFORE STARTING ENGINE 3 Walk-around Checks 3 Before starting the engine, look around the machine and under the machine to check for loose nuts or bolts, or leakage of oil, fuel, or coolant, and check the condition of the work equipment and hydraulic system. Check also for loose wiring, play, and accumulation of dust in places which reach high temperatures. and dirt cover to carry out inspection and mainte nance, always open the cover until it is secured in position by the stopper.
q Immediately remove any flammable materials that have accumulated around the battery or engine muffler and other high temperature parts of the engine. Leak age of oil and fuel will cause the machine to catch fire. Always check thoroughly and repair any problems or contact your Komatsu distributor. q Check that the floor is secured properly by bolts (1). If it is not secured properly, it may cause serious per sonal injury. If the machine is at an angle, reposition it level before checking. Carry out the following inspections and cleaning every day before starting the engine for the day's work. 1. Check for damage, wear, play in work equipment, cylinders, linkage, and hoses.
Check that there are no cracks, excessive wear, or play in the work equipment, cylinders, linkage, or hoses. If any abnormality is found, repair it. 2. Remove dirt and dust from around engine, battery, and radiator Check that there is no dirt or dust accumulated around the engine or radiator. Check also that there is no flam mable material (dry leaves, twigs, etc.) accumulated around the engine muffler or high temperature parts of the engine, or around the battery. Remove all dirt, dust, and flammable materials. 3. Check for leakage of water or oil around engine Check that there is no leakage of oil from the engine or leakage of water from the cooling system.
If any abnor mality is found, repair it. 4. Check for oil leakage from hydraulic equipment, hydraulic tank, hoses, joints Check that there is no oil leakage. If any abnormality is found, repair the place where the oil is leaking. 3-40 WARNING