. OPERATION OPERATION OPERATION OPERATION Continue to run the engine under a light load until engine coolant temperature gauge indicator (2) is within the green range (B). (A): White range (B): Green range (C): Red range 3. Check for abnormal exhaust gas color, noise, or vibration. problem is found, contact your Komatsu distributor. STARTING IN COLD WEATHER (Ambient temperature below 10 ° C (50 ° F)) 3 - 91 2. After warm-up is completed, check gauges and caution lamps for proper operation. If any p If any NOTICE When the hydraulic oil is at low te mperature, do not carry out operations o o D r move the levers suddenly. peration.
This will help to exten o not accelerate the engine sudd Always carry out the warming-up d the machine life. enly before the warming-up operation is D completed. o not run the engine at low idlin g or high idling continuously for more t c is s han 20 minutes. This will cause d amage to the environment. It will also ause damage to the internal part s of the turbocharger and engine. I f it necessary to run the engine at i dling, apply a load or run at mid-range peed from time to time. 1. Turn fuel control dial (1) to th e mid point between the low idling speed (MIN) and full speed (MAX) to start up the engine.
REMARK The machine holds an engine re volution at 1200 rpm by means of its e ngine cooling water warmin g-up function until after the engine cooling water temperature reach es 30°C (86°F). ion, see "STARTING IN COLD For