Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE SERVICE PROCEDURE WHEN REQUIRED CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT WARNING the engine and damage it. piston at the display portion of dust indicator (1) becomes red (7.5 kPa), clean the outer element. 2. Remove three clips (2), then remove cover (3). 4 - 20 If inspe ction, cleaning, o r maintenance is carried out wi th the engine running, dirt will get into t ons. Always stop the engine before carrying out these operati When u sing compressed air, there is dang er that dirt may be blo wn around and cause serious inju Always use protective gl asses, dust mask, and other pro tective e quipment.

CHECKIN If the yel NOTICE an the filter element until after a yellow piston in the dust isplay has come in the red area (7.5 kPa). element is cleaned frequently before the yellow piston in the D o not cle indicator d If the filter isplay has come element is clean in the red area (7.5 ed frequently bef dust indic cannot exe In addition ator display com rt its inherent cle , dust sticking to es in the red are aning capability, r the element falls a (7.5 kPa), th educing its cl into the inner e air cl eaning e element eaner ffect. each time the el ement is cleaned . CLEANING OR REPLACING OUTER ELEM 1. Open the left engine side cover. NOTICE Never remo ve inner elemen t (5).

If it is remove d, dust will en ter and cause engine trou ble. 3. Remo ve outer eleme 4. Clean the interior of the air cleaner b ody, cover (3 ) and e vacuator