. MAINTENANCE SERVICE PROCEDURE CLEANING AND INSPECTION OF FINS OF RADIATOR, OIL COOLER, CONDENSER AND CLEANING BY COOLING FAN REVERSE TURN 1. Turn starting switch (1) to the "OFF" position and stop the engine. (2) to the cleaning position be 4 - 31 AFTER-COO If the radiator f ins are clogged or dirt y, clean and inspect th NOTICE n jobsites where the fins often become clogged, always do as follows after completing operations. e cooling fan in the reverse direction, be extremely careful of flying dust. side cover on the left side of the machine and be careful not to let dust accumulate inside the engine room.
e fan in reverse, do not open the engine side cover on the right side of the machine. When working o n jobsites where the fins often become clogged, a lways do as follows after comple When rotating th e cooling fan in the reve rse direction, be extreme ly careful of flying dust. Open the engine side cover on the left si de of the machine and be careful not to let dust accumulat e inside the engine ro When rotating th e fan in reverse, do not open the engine side cov er on the right side of the machin When stopping t he engine when the cool ing fan is rotating in the r everse direction, first run the engi ne at low idling, then stop it.
After running th e fan in the reverse direct ion, check that there are n o dry leaves, dust, or other flamm able materials on the e ngine. In particular, be careful to check that the re are no dry leaves, dust , or other flammable materials aro und places that beco me hot during operation s, such as the exhaust m anifold, turbocharger, an d top of the exhaust pipe. If any fla mmable materials are found, remove them. The dust and d irt stuck to the radiator and cooler can be blow n out by rotating the cooling fa n in the reverse dire ction. 2. Turn starti ng switch (1) to the "O 3. Set fan ro (CLN).
Cooling fa n reverse rotation pilo REMARK Even if it is att empted to reverse a ro tation direction of the fa engine is running, the rotation direction can In that case, c ooling fan operation c hecking lamp (4) flash warns that the fan rotation cannot b e reversed.