. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE holder. 4 - 67 5. 6. Put a con Using a f tainer under filter cartridge ilter wrench, turn cartridge (4) to receive drained (4) to the left to remov oil. e it. NOTICE Do not fill t he new filter cartridge with fue Remove ca p (B) and install the filter cartr 7. Clean the filter holder, coat the pack ing surface of the new fi lter cartridge thinly with oil, then install th e filter cartridge to the fi lter 8. When ins talling, tighten until the pac king surface contacts t he s eal surface of the filter hol der, then tighten it 3/4 of a turn.
If the filte r cartridge is tightened too far, the packing will be damage d and this will lead to leakage of fuel. If the filter cartr idge is too loose, fuel will also leak from the packing, so a lways tighten the cor 9. Open fue l tank valve (1). 10. Bleed air from fuel filter cartridge (4 ) after the replacement Bleed the air as follows: 11. Add fuel to the fuel tank until full (to FULL mark on the fue l gauge) 12. Insert the key into the engine starti ng switch and turn the key to ON position (B). Then the electric priming pump begins to work.