. MAINTENANCE SERVICE PROCEDURE EVERY 1000 HOURS SERVICE Maintenance for every 50, 250 and 500 hours should be carried out at the same time. REPLACE FUEL MAIN FILTER CARTRIDGE Carry out this operation after carrying out the maintenance in the "REPLACE FUEL PRE-FILTER CARTRIDGE (PAGE 4-63)" for every 500 hours. WARNING Prepare a filter wrench and a container to catch the fuel. 1. Open the inspection cover at the bottom of the fuel tank. 2. Close fuel tank valve (1). 3. Open up the engine side cover on the left side of the machine. 4. Remove bolts (2) - 2 bolts in total- to remove lower side cover (3).
4 - 66 After the engine has been ope rated, all parts are at high temperature, so do not replace the filter imm ediately. Wait for all parts to cool down before starting t he operation. side the engine fuel piping system when the engine is running. High pressure is generated in When replacing the filter, wai t for at least 30 seconds after stopping the engine to let the internal pressure go down before replacing the filter. close. Do not bring any fire or flame NOTICE Genuine Komatsu fuel filter c artridges use a special filter that has highly efficient filtering ability. When replacing the filter cartridge, always use a genui ne Komatsu part.
The common rail fuel injectio n system used on this machine consists of more precise parts than the conventional injection pump and nozzle. If any part other than a genuin e Komatsu filter cartridge is used, dust or dirt may get in and cause p roblems with the injection system. Always avoid using s ubstitute parts. When carrying out inspection or maintenance of the fuel system, pay more attention than normal t o the entry of dirt. If dirt is stuck to any part, use fuel to wash it off completely.