Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECK OIL LEVEL IN DAMPER CASE, ADD OIL WARNING before 4 - 72 The oil is at high tempe rature immediately after the mac hine has been operated. Wait for the o il to cool down before starting the operation The undercover is heav y. Never try to open or close th e cover when directly beneath it. Whe n removing bolts(2), carry out the work from the rear of the cover so that you can easily get out of the wa I f t he quantity of the oil in the damper is insufficient, the damper may be seized. Accordingly, check, and add o g to the following procedure.

over from the rear bottom of the machine lts (1) from the front side of the machine er, remove two bolts (2) from the rear side body. the cover gradually. hine place replace the oil accordin 1. Remove the underc body as follows. 1) Remove two bo body. 2) Holding the cov of the machine 3) Lower and open (A) Front of mac (B) Dangerous 1. Remove the underc er, remove two bolts (2) from t he rear side 2. Remove oil level plu g (3) and check the oil level. T he proper oil level is the bottom e Tighten plug (3). dge of the plug hole. REMARK hile the engine is stopped. Check the oil level w If the machine is in clined, set it in a level pos l. checking the oil leve 3.

If the oil level is belo w the bottom edge of the plug h ole, remove oil filler plug (4) and Add new oil until th level plug (3). add new oil. e oil level reaches the bottom edge of oil of oil