Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING CLEAN BREATHER 1. Open cover on the right side of the machine. 2. Remove breather(1), then use clean diesel fuel or flushing fluid to rinse the dirt out from the inside. 4 - 73 The oil is at high temperature immedi ately after the machine has been operated. Wait for the oil to c ool down before starting the operatio If there is sti ll pressure remaining insi de the case, the oil or p lug may f ly Loosen the plug slowly to release the Refill capa city: each) 24 liters (6.34US gal) : (each) 27 liters (7.13US gal) D65EX : ( D65PX,WX 1. Stop the m 2. Remove drain plug 3. After drai 4. Add oil to 5.

Check th "CHECK (PAGE 4- D65EX : ( each) 24 liters (6.34US D65PX,WX : (each) 27 liters (7.13 1. Stop the m achine so that drain pl ug (3) is directly at the bottom. 2. Remove oil level plug (2) and o il filler plug (1), then remove the oil. plugs (3) and (4). drain plug s (3) and (4), and drain 3. After drai ning the oil, install drain 4. Add oil to the specified level throu gh the hole in oil filler plu g (1). Check th at the oil is at the spe cified level. For details, "CHECK (PAGE 4-