N40469 Chapter 3 Auxiliary control panel overview The auxiliary control panel shown in figure 2 is used on craft which have an extra control point. The switches are protected from the entry of water, but if the control panel is in an exposed location, it should be protected by a cover when not in use. Below is a description of the instrument and switches on the auxiliary panel. 1. Tachometer - indicates the engine speed. 2. Engine hours/fault code display - displays accumulated hours and fault codes. 3. Warning light 4. Warning lamp - indicates a fault signal. 5. Engine crank - turns the engine over. 6. Keyswitch on/off - energises the panel. Figure 2 7.
Diagnostic lamp - indicates active diagnostics codes. 8. Engine stop switch - stops the engine. 9. Panel illumination - ten positions of brightness. 10. Warning lamp - overspeed. Caution: If the audible warning device operates, the warning light(s) on the relevant main panel will indicate the engine affected. Reduce the speed of the engine affected to idle and, if necessary, stop the engine. Page 11